PPGI / Galvalume
26 Standard Models
470 – 900 mm
≥ 1:20 (2.86°)
15–20 years (PPGI)
| # | Model | Width (mm) | t (mm) | Section Properties | Usage | ||
|---|---|---|---|---|---|---|---|
| cover | coil | I (cm⁴/m) | W (cm³/m) | ||||
| 1 | YX25-210-840 | 840 | 1000 | 0.5 | 9.18 | 4.68 | Roof / Wall |
| 2 | 0.8 | 14.59 | 7.47 | ||||
| 3 | YX28-205-820 | 820 | 1000 | 0.5 | 10.28 | 5.24 | Roof / Wall |
| 4 | 0.6 | 12.05 | 6.33 | ||||
| 5 | 0.8 | 16.34 | 8.37 | ||||
| 6 | YX25-205-820 | 820 | 1000 | 0.5 | 8.60 | 4.22 | Roof / Wall |
| 7 | 0.6 | 10.12 | 5.32 | ||||
| 8 | YX35-125-750 | 750 | 1000 | 0.5 | 11.54 | 6.23 | Roof / Wall |
| 9 | 0.6 | 13.85 | 7.48 | ||||
| 10 | YX32-210-840 | 840 | 1000 | 0.5 | 10.23 | 9.20 | Roof / Wall |
| 11 | 0.6 | 12.29 | 10.75 | ||||
| 12 | 0.8 | 16.38 | 14.71 | ||||
| 13 | YX35-280-840 | 840 | 1000 | 0.5 | 10.32 | 8.81 | Roof / Wall |
| 14 | 0.6 | 11.17 | 10.57 | ||||
| 15 | 0.8 | 15.77 | 14.21 | ||||
| 16 | YX15-225-900 | 900 | 1000 | — | — | — | Roof / Wall |
| 17 | YX12-65-850 | 850 | 1000 | — | — | — | Roof / Wall |
| 18 | YX30-160-800 | 800 | 1000 | — | — | — | Roof / Wall |
| 19 | YX10-32-864 | 864 | 1000 | — | — | — | Roof / Wall |
| 20 | YX35-130-780 | 780 | 1000 | — | — | — | Roof / Wall |
| 21 | YX12-110-880 | 880 | 1000 | — | — | — | Roof / Wall |
| 22 | YX19-64-820 | 820 | 1000 | — | — | — | Roof / Wall |
| 23 | YX10-105-840 | 840 | 1000 | — | — | — | Roof / Wall |
| 24 | YX10-32-864 | 864 | 1000 | — | — | — | Roof / Wall |
| 25 | YX15-225-900 | 900 | 1000 | — | — | — | Roof / Wall |
| 26 | YX51-250-750 | 750 | 1000 | — | — | — | Roof / Wall |
Reading the table: Items 1–26 are thickness variants of the 10 primary load-bearing profiles, each with full structural section data (I = section inertia, W = section resistance). Items 27–42 are 16 specialty profiles for decorative, arched and lightweight applications where the cover-width geometry is the primary spec — structural values are not published. | Custom profiles: Vikkins operates 60+ production lines with daily output of 3,000 m². Bespoke profiles available on request — minimum order quantities apply.
Corrugated steel wall profiles are the workhorse cladding for industrial and commercial buildings. Roll-formed from PPGI or Galvalume coil, they combine high strength-to-weight with proven weather resistance, and install quickly over steel or timber girts. Profile pitch and sheet thickness are matched to your wind load and span, while a wide range of colours lets the corrugated steel wall blend with roof and trim for a consistent finish.
Vikkins supplies corrugated steel wall sheets alongside matching roof systems and complete steel building products, so colour, gauge, and lead time line up on site. Our profiles are manufactured to recognised structural standards, including guidance from the American Institute of Steel Construction (AISC). Whether you are cladding a warehouse, factory, or agricultural building, our team specifies the right corrugated steel wall profile for your climate and budget.
