Accessoires de mur

Doors, windows, flashings and trims engineered to integrate with our wall sandwich panels. Same coil, same coatings, profile-matched geometry — everything needed to finish the envelope.

Industrial & personnel doors for steel buildings

Door Types

Rolling / Sliding / Sectional / Personnel

Max Width

up to 8 m (rolling) / 6 m (sliding)

Frame Material

Galvanized steel · Powder coat

Hardware

Mortise lock · Heavy-duty hinges

Opération

Manual / motorized options

Sealing

EPDM weather seal · Threshold

Specifications by door type

Type	Max Size (W×H)	Frame	Sheet / Slat (mm)	Opération	Lead Time
Rolling Shutter	8.0×6.0 m	Galvanized rails	0.5–0.7	Manual / motorized	15–25 d
Sliding Door	6.0×5.0 m	Top-hung track	0.6–1.0	Manual	10–15 d
Sectional Door	5.0×5.0 m	Spring-balanced	40 mm insulated	Motorized	20–30 d
Personnel Door	0.85×2.05 m	Steel / aluminum	40 mm leaf	Manual	5–10 d

Doors for every industrial opening

01 Factory Loading Bays

Rolling shutters and sectional doors for large-vehicle access in production halls.

02 Cold Storage Entries

Insulated sectional doors with thermal break to maintain refrigerated environment.

03 Warehouse Yards

High-cycle sliding doors for forklifts, pallet trucks, and quick fulfillment ops.

04 Personnel Egress

Code-compliant pedestrian doors with weather seals and security hardware.

Aluminum & uPVC windows engineered for the envelope

Window Types

Sliding / Casement / Fixed / Awning

Glazing

5 mm single · 5+12A+5 double · Tempered

U-value

1.4–5.8 W/m²K (depends on glazing)

Frame

Aluminum 60 / 70 / 80 series · uPVC

Revêtement

Anodized · Powder coat · Wood-grain

Hardware

Multi-point lock · Friction stay

Specifications by window type

Type	Max Size (W×H)	Frame Series	Glazing	Air-tightness	Lead Time
Sliding 2-panel	3.0×1.8 m	AL 60 / 70	5+12A+5 DGU	Class 2	15–25 d
Casement	1.5×2.0 m	AL 60 / 80	5+12A+5 DGU	Class 3	15–25 d
Fixed	3.0×2.5 m	AL 70	5+12A+5 / 8+12A+8	Class 4	10–15 d
Awning	2.0×1.0 m	AL 60	5 mm single / DGU	Class 2	15–25 d

Daylight, ventilation, security

01 Factory Curtain Walls

Long ribbon windows for natural daylight on production floors and assembly halls.

02 Office Mezzanines

Casement and fixed windows for site offices integrated into industrial buildings.

03 Warehouse Clerestory

High-level fixed glazing for ambient light without direct sun penetration.

04 Personnel Quarters

Sliding and awning windows for accommodation, kitchens, and break rooms.

Roof & wall flashings for a watertight envelope

Components

Ridge / Valley / Eave / Verge / Corner

Matériau

Galvalume AZ150 / Galvanized Z275

Longueur standard

2 / 2.5 / 3 m · Custom up to 6 m

Revêtement

PE / HDP / PVDF / SMP

Épaisseur

0.4 / 0.5 / 0.6 mm

Color Match

Identical to roof / wall panels

Standard flashing profiles

Composant	Coverage	Matériau	Épaisseur (mm)	Available Length	Application
Faîtière	Roof apex	Galvalume / pre-painted	0.4–0.6	2 / 2.5 / 3 m	Roof — ridge
Valley Flashing	Roof intersection	Galvalume	0.5–0.6	Custom (up to 6 m)	Roof — valley
Eave Flashing	Roof-wall edge	Galvanized + PE/PVDF	0.4–0.5	2 / 2.5 / 3 m	Roof — eave
Verge / Barge	Gable end	Galvanized + PE/PVDF	0.4–0.5	2 / 2.5 / 3 m	Roof — gable
Wall Corner Trim	External / internal	Galvanized + PE/PVDF	0.4–0.5	2 / 2.5 / 3 m	Wall — corner
Base Flashing	Wall-foundation	Galvalume Z275	0.5–0.6	2 / 2.5 / 3 m	Wall — plinth

Doors for every industrial opening

01 Factory Loading Bays

Rolling shutters and sectional doors for large-vehicle access in production halls.

02 Cold Storage Entries

Insulated sectional doors with thermal break to maintain refrigerated environment.

03 Warehouse Yards

High-cycle sliding doors for forklifts, pallet trucks, and quick fulfillment ops.

04 Personnel Egress

Code-compliant pedestrian doors with weather seals and security hardware.

Door, window & opening closures

Trim Profiles

Head / Sill / Jamb / Reveal

Foam Closures

EPDM / PE · Profile-matched

Vis autotaraudeuses

SS304 head + EPDM washer

Sealants

Neutral silicone · PU · Butyl

Weatherstrip

EPDM gasket · Brush seal

Application

Door / window opening closures

Trim & closure components

Composant	Matériau	Profil	Color Match	Form Factor	Sold As
Head / Drip Trim	Galvanized + PE/PVDF	U-section	Yes	2 / 2.5 / 3 m	Linear meter
Sill Flashing	Galvalume + PE/PVDF	Sloped section	Yes	2 / 2.5 / 3 m	Linear meter
Jamb / Reveal Trim	Galvanized + PE/PVDF	L & J profiles	Yes	2 / 2.5 / 3 m	Linear meter
Fermeture à mousse	EPDM / PE foam	Profile-matched	—	Self-adhesive strip	Per panel run
Sealing Strip	Butyl / EPDM	Tape / extruded	—	Roll	Per roll
Vis autotaraudeuses	SS304 head + EPDM	#12 × 25/32/45 mm	Color cap	Box	Per 250 / 500 / 1000
Mastic	Neutral silicone / PU	Cartridge	Yes	300 ml tube	Per tube / case

The little parts that make the envelope work

01 Door / Window Openings

Profile-matched head trims, sill flashings and jamb reveals around every opening.

02 Panel-to-Frame Joints

Foam closures fill gaps between corrugation profile and structural framing.

03 Weather Sealing

Butyl tape under fasteners; silicone sealant at panel laps and trim transitions.

04 Mechanical Fixing

Color-matched self-tappers with EPDM washers for weather-tight fastening.

Wall Accessories for a Complete Steel Building Envelope

Wall accessories including doors, windows, flashings and trims by Vikkins

Vikkins supplies a complete range of wall accessories to finish and seal every steel building wall. Our wall accessories include industrial and personnel doors, fixed and sliding windows, corner and base flashings, and a full set of trims and closures. Each item is rolled from the same coil and coatings as your wall panels and profile-matched to the same geometry, so colour, gauge, and shape line up perfectly across the whole envelope.

Ordering wall accessories together with your panels means matched lead times, fewer suppliers, and no missing parts when your containers arrive on site. Each accessory pairs naturally with our systèmes de murs et la gamme plus large de produits de construction en acier, all manufactured to recognised standards such as the Institut américain de la construction en acier (AISC).

Doors, windows, flashings and trims

Doors range from rolling and sectional industrial doors up to 8 m wide to personnel doors for daily access. Windows are weatherproof and profile-matched for clean integration. Flashings seal corners, bases, eaves, and openings against wind-driven rain, while trims and closures finish exposed edges and stop pests and draughts. Specifying the right wall accessories from the start protects the building, improves its appearance, and avoids costly site improvisation later.

Engineered for your climate

Whether your project faces tropical heat, hurricane winds, or cold climates, our wall accessories are specified to suit local conditions and integrate with insulated panels for thermal and acoustic performance. Our multilingual team works in English, Spanish, French, and Chinese, supporting owners and dealers across the Americas, the Caribbean, and beyond. Send us your wall layout, openings, and location, and we will recommend the right wall accessories, prepare a tailored quotation, and arrange shipping and installation support worldwide.

Specify a Complete Wall Package

Tell us your panel selection — we'll auto-generate a recommended accessory schedule with quantities, sizes and lead times. One-stop procurement, color-matched, ready to install.